This will also fix CWM formatted boot partitions.
IF ERROR IS COOKIE NOT RECEIVED, sorry it is still bricked. Proceed to flash Jelly Bean BP Firmware and then flash Jelly Bean img dump.ġ1.
Check the flare, it will show RESET FOR ENTRY QPST.ġ0. If the error is TIME OUT WAITING, press OK and then press SWITCH DEVICE TO DLOAD. An warning message may appear, TIME OUT WAITING etc etc or COOKIE NOT RECEIVED. Press LOAD PATCH DEF > navigate to your extracted JB firmware > select patch0 > press OPENĩ. Press LOAD XML DEF > navigate to your extracted JB firmware > select rawprogram0 > press OPEN.ħ. Under BOOT IMAGE, enter 8X25_msimage.mbnĦ. Under FLASH PROGRAMMER FILENAME, enter MPRG8X25.hexĥ. Put check mark on PROGRAM BOOTLOADERS, PROGRAM MMC DEVICE, TRUSTED.Ĥ. Look for the PHONE TAB that says DOWNLOAD. If you are on Win7, make sure you run it under compatibility XP Sp3 and RUN AS ADMINISTRATORĢ. Run QPST and reprogram EMMC (this is where the magic begins) It should now be listed under COM PORTS > Qualcomm HSUSB QDLOADER 9008. It will install the driver, if it prompts for unsigned drivers, press INSTALL ANYWAY.ĥ. Double click UNKNOWN DEVICE > UPDATE DRIVER > BROWSE MY COMPUTER > browse to the folder where you saved extracted the ICS / JB drivers. If there is no item under PORTS (COM & LPT), check device manager under OTHER DEVICES > Unknown DeviceĤ. If it does not exist, proceed to step3.ģ. If the item is there, you are done with driver install. Check if there is an item called Qualcomm HSUSB QDLOADER 9008. Go to device manager, expand PORTS (COM & LPT). Follow the defaults, press NEXT until it is finished with the install.ġ. Run SETUP.EXE, press INSTALL when it prmpt to insall additional Visual C++ runtime libraries.
Steps How to Fix - (still finishing documentation with screenshots, I reformatted my laptop and need to find updated MS Office.)ġ. Jelly Bean img dump - you can use the one posted in the group (boot.img, recovery.img, system.img, userdata.img, cache.img) Jelly Bean BP Firmware - Download (you can also use the one posted in the group) Ive tested this using version 2.7 build 399 I've tested this using Windows XP SP3 and Windows 7 32bit SP1.ĥ. Deadboot flare but still gets detected in device manager (unknown device or in COM PORTS)Ĥ. (REPOST ) I'm not the owner of this tutorials,ġ. FIX deadboot / no recovery / no fastboot / formatted while in QPST mode.
0 kommentar(er)
